Total Light® Well Light With Classic Brass Louvered Top

Product Overview

The Total Light TL-WL-2-CB is a 12V low-voltage well light designed for concealed landscape illumination with a louvered Classic Brass top. Most of the fixture installs below grade, leaving the solid-brass louvered cover visible at the surface. The louver helps shield the lamp from direct view and directs the visible light outward and upward, making this fixture useful where glare control and a lower-profile daytime appearance are important.

An injection-molded poly housing supports the below-grade portion of the fixture, while a clear glass lens sits beneath the brass louvered top. Inside, a ceramic bi-pin socket with nickel contacts accepts a replaceable LED MR16 lamp. Because the lamp is sold separately, the installer can choose the beam angle, lumen output and color temperature that suit the pathway, wall, tree, planting area or architectural feature being illuminated. A 36-inch length of 18/2 direct-burial lighting wire is attached for connection to a compatible low-voltage landscape lighting system.

The TL-WL-2-CB can be used as an alternative to an above-ground spotlight where a recessed fixture is preferred. The louvered top can also help shield the glass from incidental landscape debris, but the product information does not identify the fixture as drive-over or submersible. Install it in a stable, properly drained area away from vehicle loads and locations that collect standing water. Correct transformer sizing, wire selection, outdoor-rated connections and lamp selection are all important parts of a complete installation. Refer to the product specification sheet for the current fixture drawing and additional product details.

Key Features

• Low-profile well-light design keeps most of the fixture below grade
• Solid-brass louvered top with a Classic Brass visible finish
• Louver helps shield the lamp from direct view and reduce visible glare
• Clear glass lens included beneath the louvered cover
• Injection-molded poly fixture housing
• Replaceable LED MR16 lamp system
• Ceramic bi-pin socket with nickel contacts
• 36-inch 18/2 direct-burial lighting wire lead
• Designed for 12V low-voltage landscape lighting
• Maximum lamp rating of 50 watts
• ETL marked

Common Uses

• Low-level illumination near pathways and landscape edges
• Accent lighting for walls, columns and architectural details
• Uplighting trees and taller plant material
• Garden beds and landscape focal points
• Locations where an above-ground spotlight would be visually distracting
• Projects where a louvered cover is preferred for glare control
• Residential and light-commercial low-voltage landscape lighting systems

Technical Specifications

• Voltage: 12V low voltage
• Lamp Type: LED MR16
• Lamp Included: No
• Maximum Lamp Rating: 50 watts
• Socket: Ceramic bi-pin base with nickel contacts
• Base Material: Injection-molded poly
• Top Material: Solid brass
• Top Style: Louvered
• Visible Finish: Classic Brass
• Lens: Clear glass, included
• Lead Wire: 36-inch 18/2 direct-burial lighting wire
• Certification Mark: ETL
• UPC: 810016890928

Lamp and System Compatibility

The TL-WL-2-CB uses a replaceable 12V LED MR16 bi-pin lamp. Select the beam spread, output and color temperature according to the feature being illuminated, the fixture’s distance from the target and the desired visual effect. The fixture must be connected to a compatible low-voltage transformer and landscape lighting system. The MR16 lamp and transformer are sold separately.

View compatible Total Light MR16 LED lamps

Installation and Planning Notes

• Install only as part of a compatible 12V low-voltage landscape lighting system.
• Prepare a stable, properly drained installation area that does not collect standing water.
• Do not place the fixture where it will be subjected to vehicle loads unless a separate load-rated enclosure and installation method are provided.
• Orient the louver toward the intended lighting area and away from primary viewing angles when glare control is desired.
• Keep the louver openings and clear lens free of soil, mulch, leaves and other material that can obstruct light or trap moisture.
• Use appropriately sized transformer capacity, landscape wire and approved outdoor connections for the complete system.
• Choose the MR16 lamp beam angle according to the width and distance of the area being illuminated.

What Is Included

• One Total Light low-voltage well-light assembly
• Injection-molded poly base
• Solid-brass Classic Brass louvered top
• Clear glass lens
• 36-inch 18/2 direct-burial wire lead

What Is Not Included

• LED MR16 lamp
• Low-voltage transformer
• Main landscape lighting wire and installation connectors
• Drainage material or installation sleeve

Product Specification Sheet

Use the current specification sheet for the fixture drawing and additional product details.

Frequently Asked Questions

Does the TL-WL-2-CB include an MR16 lamp?

No. The fixture uses a replaceable 12V LED MR16 bi-pin lamp, which is sold separately.

What does the louvered top do?

The solid-brass louver helps shield the lamp from direct view, controls the visible direction of the light and provides some protection for the clear glass lens from incidental landscape debris.

Can this well light connect directly to household voltage?

No. It is designed for a compatible 12V low-voltage landscape lighting system and requires an appropriately sized transformer.

Can this fixture be installed where vehicles drive over it?

The product information does not identify it as drive-over rated. Install it away from vehicle loads and in a stable, properly drained landscape location.

Why Choose Total Light?

Total Light fixtures are designed to support coordinated low-voltage landscape lighting systems with replaceable lamps and accessible product resources. The TL-WL-2-CB combines a concealed well-light profile, solid-brass louvered top and flexible MR16 lamp selection for controlled landscape and architectural illumination.