Total Light® Well Light With Classic Brass & Clear Lens Top

Product Overview

The Total Light TL-WL-1-CB is a 12V low-voltage well light designed to provide concealed uplighting from within lawns, planting beds, gravel areas and other suitable landscape locations. Its recessed profile keeps most of the fixture below grade while the Classic Brass top and clear glass lens remain visible at the surface. This configuration can help create a cleaner daytime appearance than a traditional above-ground spotlight while directing unobstructed light upward toward trees, architectural details, columns, walls and landscape features.

The fixture combines an injection-molded poly base with a solid-brass top for outdoor landscape lighting applications. The included clear glass lens allows the selected lamp’s beam to shine without a louver or directional cover. Inside, a ceramic bi-pin socket with nickel contacts accepts a replaceable LED MR16 lamp, allowing the installer to choose the beam spread, lumen output and color temperature that fit the project. The lamp is sold separately. A 36-inch length of 18/2 direct-burial lighting wire is attached to support connection to a compatible low-voltage landscape lighting system.

This well light can be used where a lower-profile fixture is preferred near lawns, walkways, planting areas and architectural features. It is not identified as a drive-over or submersible fixture, so placement should avoid vehicle loads, standing water and locations where drainage is inadequate. Proper site preparation, transformer sizing, wire selection and outdoor-rated connections are important parts of the complete installation. Refer to the product specification sheet for the current fixture drawing and additional product details.

Key Features

• Low-profile well-light design keeps most of the fixture below grade
• Clear glass lens provides an unobstructed upward beam
• Solid-brass top with a Classic Brass visible finish
• Injection-molded poly fixture base
• Replaceable LED MR16 lamp system
• Ceramic bi-pin socket with nickel contacts
• 36-inch 18/2 direct-burial lighting wire lead
• Designed for 12V low-voltage landscape lighting
• Maximum lamp rating of 50 watts
• ETL marked

Common Uses

• Uplighting trees and taller plant material
• Illuminating columns, walls and architectural details
• Accent lighting for garden features and landscape focal points
• Low-profile lighting near lawns and planting beds
• Locations where an above-ground spotlight would be visually distracting
• Residential and light-commercial low-voltage landscape lighting systems

Technical Specifications

• Voltage: 12V low voltage
• Lamp Type: LED MR16
• Lamp Included: No
• Maximum Lamp Rating: 50 watts
• Socket: Ceramic bi-pin base with nickel contacts
• Base Material: Injection-molded poly
• Top Material: Solid brass
• Visible Finish: Classic Brass
• Lens: Clear glass, included
• Lead Wire: 36-inch 18/2 direct-burial lighting wire
• Certification Mark: ETL
• UPC: 810016890911

Lamp and System Compatibility

The TL-WL-1-CB uses a replaceable 12V LED MR16 bi-pin lamp. Choose the beam angle, output and color temperature according to the object being illuminated, mounting distance and desired visual effect. The fixture must be connected to a compatible low-voltage transformer and landscape lighting system. The MR16 lamp and transformer are sold separately.

View compatible Total Light MR16 LED lamps

Installation and Planning Notes

• Install only as part of a compatible 12V low-voltage landscape lighting system.
• Prepare a stable, properly drained installation area that does not collect standing water.
• Do not place the fixture where it will be subjected to vehicle loads unless a separate installation method and load-rated enclosure are provided.
• Keep the clear lens free of soil, mulch, leaves and other material that can obstruct the beam or trap moisture.
• Use appropriately sized transformer capacity, landscape wire and approved outdoor connections for the complete system.
• Aim and lamp selection should be planned around the height, distance and surface of the feature being illuminated.

What Is Included

• One Total Light low-voltage well-light assembly
• Injection-molded poly base
• Solid-brass Classic Brass top
• Clear glass lens
• 36-inch 18/2 direct-burial wire lead

What Is Not Included

• LED MR16 lamp
• Low-voltage transformer
• Main landscape lighting wire and installation connectors
• Drainage material or installation sleeve

Product Specification Sheet

Use the current specification sheet for the fixture drawing and additional product details.

Frequently Asked Questions

Does the TL-WL-1-CB include an MR16 lamp?

No. The fixture uses a replaceable 12V LED MR16 bi-pin lamp, which is sold separately.

What type of light pattern does the clear lens provide?

The clear glass lens does not add a louver or directional shield, allowing the selected MR16 lamp’s beam to shine upward without that type of obstruction.

Can this well light connect directly to household voltage?

No. It is designed for a compatible 12V low-voltage landscape lighting system and requires an appropriately sized transformer.

Can this fixture be installed where vehicles drive over it?

The product information does not identify it as drive-over rated. Install it away from vehicle loads and in a stable, properly drained landscape location.

Why Choose Total Light?

Total Light fixtures are designed to support coordinated low-voltage landscape lighting systems with replaceable lamps and accessible product resources. The TL-WL-1-CB combines a concealed well-light profile, solid-brass visible top and flexible MR16 lamp selection for landscape and architectural uplighting.