Total Light Remote for Dimming, CCT 2700/3000K Selection and On/Off Control
- Regular price
- $14.90
- Sale price
- $14.90
- Regular price
-
- Unit price
- per
Product Overview
The Total Light TL-REMOTE is a handheld installer control designed for select Total Light LED fixtures with compatible remote-adjustment capability. It provides access to supported dimming, on/off control and 2700K or 3000K color-temperature selection, allowing the installer to fine-tune the appearance of a completed lighting scene without opening or removing the fixture.
The remote is intended for close-range, individual-fixture adjustment. The current product information lists an operating range of approximately 12 to 24 inches and states that the remote controls one compatible fixture at a time. This focused control helps the installer stand near each light, adjust its brightness and warm-white setting, and then move to the next fixture. It is especially useful when neighboring fixtures need slightly different output levels because of mounting height, surface reflectance, spacing or the amount of ambient light in the area.
Use the TL-REMOTE only with Total Light fixtures specifically identified as remote-compatible. It is not presented as a universal controller for every Total Light fixture or for standard replaceable G4 and MR16 lamps. Confirm the fixture model before ordering and retain access to the remote after installation for future scene adjustments. Refer to the product specification sheet below for the current operating instructions and additional product information.
Key Features
- Handheld control for select compatible Total Light LED fixtures
- Supports fixture dimming
- Selects between supported 2700K and 3000K color-temperature settings
- Provides supported on/off control
- Controls one compatible fixture at a time
- Approximate listed operating range of 12 to 24 inches
- Useful for installation, commissioning and later lighting-scene adjustments
Compatible Total Light Fixtures
The following active Total Light products are currently confirmed as compatible with the TL-REMOTE:
Do not assume compatibility based only on fixture appearance or LED construction. The fixture listing should specifically identify TL-REMOTE support.
Common Uses
- Balancing brightness between nearby step lights
- Adjusting hardscape lighting after final aiming and installation
- Coordinating compatible fixtures with a 2700K or 3000K lighting design
- Reducing excessive output on reflective stone, brick or light-colored surfaces
- Making individual fixture adjustments during project commissioning
- Revising a completed lighting scene as landscaping or surrounding conditions change
Technical Specifications
- Model: TL-REMOTE
- Product Type: Handheld fixture-control remote
- Supported Controls: Dimming, 2700K/3000K selection and on/off control
- Control Method: One compatible fixture at a time
- Approximate Listed Range: 12 to 24 inches from the fixture
- Confirmed Compatible Models: TL-SL200-CB and TL-HS200-6-CB
Operation and Planning Notes
- Stand within the listed operating range of the fixture being adjusted.
- Aim and operate the remote toward one compatible fixture at a time.
- Complete adjustments after fixtures are mounted and aimed so the final lighting effect can be evaluated.
- Use consistent color-temperature settings where a uniform appearance is desired.
- Confirm each fixture listing specifically identifies TL-REMOTE compatibility.
- Keep the remote available after installation for future brightness or color-temperature changes.
- Refer to the current product specification sheet for operating instructions.
What Is Included
- One Total Light TL-REMOTE handheld control
What Is Not Included
- Compatible lighting fixtures
- Low-voltage transformer, cable or wire connectors
- Standard G4 or MR16 lamps
Product Specification Sheet
Review the current specification sheet for operating information and additional product details.
Frequently Asked Questions
Which fixtures work with the TL-REMOTE?
The active products currently confirmed as compatible are the TL-SL200-CB Brass LED Step Light and TL-HS200-6-CB 6-Inch Brass LED Hardscape Light.
Can the remote control several fixtures at once?
No. The current product information states that it controls one compatible fixture at a time.
How close should the remote be to the fixture?
The listed operating range is approximately 12 to 24 inches. Position the remote near and directed toward the individual fixture being adjusted.
What adjustments can the remote make?
With a compatible fixture, it supports dimming, on/off control and selection between the fixture’s 2700K and 3000K settings.
Why Choose Total Light?
The TL-REMOTE provides a straightforward way to commission and fine-tune compatible Total Light fixtures individually. Close-range control helps installers adjust brightness and color temperature based on the actual mounting location, surrounding materials and finished nighttime appearance.